Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Parts & Accessories

Shimano Alfine SG-S700 Right Hand Dust Cap D
$8.50
Don't let a bent or worn dust cap sully an otherwise well-functioning Shimano Alfine internally geared hub. Get a spare and replace as necessary for continued performance and to preserve the longevity that you expect from Alfine.
Shimano Alfine SG-S700 Right Lock Washer Seal
$10.50
Do you need to replace the right lock washer seal on your Alfine SG-S700 internally geared hub? If you're not sure, it might not be a bad idea, as contamination from damaged or worn seals is the kryptonite of virtually maintenance-free internally geared hubs.
Shimano Alfine S7000/S700 Shift Cable Fixing Bolt Unit
$12.50
Need a Shift Cable Fixing Bolt Unit for your Alfine S7000/S700 hub? Here it is. Now, get that bike back on the road!
Shimano Alfine SG-S700 Oil Port Bolt
$13.50
Keeping contamination out of your internally geared hub is critical to its function and longevity. Sometimes, the oil port bolt comes loose and it's easy to lose, even if you've just taken it out to oil your hub. Keep a spare or two so your hub stays clean inside and it'll last you many, many miles.
Shimano Alfine SG-S700 Right Hand Cone
$15.50
New cones make hubs spin like silk. Take advantage of your Shimano Alfine hub's highly serviceable design, and replace the bearing cones if they are worn or damaged. This one is specifically for the right side.
Shimano Alfine SG-S700 Left Hand Cone with Dust Cap
$21.00
If the bearings are getting rough on your Shimano Internally Geared hub, it could simply be a matter of replacing a pitted cone and repacking the bearing with grease. - Fits left side of Alfine SG-S700 hubs
Shimano 105 5800 Rear Hub Left Cone and Lock Nut Unit
$22.49
-Replacement left side cone and locknut for Shimano 105 FH-5800 rear hub
Shimano Alfine SG-S700 Outer Receiver Unit
$25.00
This outer receiver unit works with the CJ-S700 Cassette Joint Unit for Shimano Alfine SG-S700 internally geared hub. This part can become worn, cracked, or torn, exposing the shift cable and possibly other components to unwanted dirt, water, mud, you name it. You don't want that.
Shimano Alfine SG-S700 Right Hand Dust Cap
$27.49
Don't let a cracked or worn dust cap sully an otherwise well-functioning Shimano Alfine internally geared hub. Get a spare and replace as necessary for continued performance and to preserve the longevity that you expect from Alfine.
Shimano Alfine S700 Small Parts Kit
$30.00
Add an Alfine hub, cog, spokes, and a rim to this Shimano Internally Geared Hub Small Parts Kit, and you're ready to rock. - Alfine hubs are packaged without small parts and require this kit plus a cog - Nexus hubs are packaged with small parts and cogs and do not require an additional small parts kit - For 11-Speed Hub - Includes CJ-S700 Cassette Joint for Vertical Dropouts *Cassette joint does not fit Di2 Alfine hubs
Shimano Alfine S700 Cassette Joint Unit
$32.99
Shimano Nexus and Alfine Internally Geared Hub Cassette Joints - Shimano model # CJ-S700 - Does not include cable fixing bolt unit - OEM cassette joint unit for Alfine SG-S700
Shimano Deore XT HB-M8000 Quick Release
$44.99
Shimano XT M8000 Front Hub Quick Release Skewer
Shimano 105 5800 Freehub Body
$78.99
- Cassette Body Type: Shimano/SRAM 11 Speed Road - Material: Steel
Shimano Alfine SG-S700 11-Speed Internal Assembly
$544.99
This is a set of replacement internals for Alfine SG-S700 11-Speed internally geared hubs, allowing you to reuse your old Alfine shell with brand new internals, making it like a new hub. - 187mm axle width
Spank Oozy/Spike Rear Hub 3 Pawl & Spring Kit
$17.50
Replacement Pawls for all Oozy hubs.
Spank Spoon 135/150 Rear Hub 4 Pawl & Spring Kit
$17.50
Replacement Pawls for Spoon hubs.
Spank Fratelli Tubeless Ready Tape
$25.00
SPANK Industries Fratelli Tape is a special ultra-light polyamide, adhesive tubeless conversion tape, which is ideal for SPANK's patented OohBah profile rims. Thicker, less pliable tapes are often difficult or impossible when taping complex rim profiles. Fratelli tape makes tubeless set up simple, and adapts well to a variety of rim types, including sleeved and welded joints. 25mm width tape is suggested for rims up to 29mm internal width, and 30mm tape for rims 30mm internal width and greater. With adhesive properties unaffected in a wide temperature range, Fratelli tape is also perfect for winter riders, or those in exceptionally hot environments. - Material: Ultra Thin Polyamide - Width: 25mm or 30mm - Features: high temperature range adhesive, ideal for complex rim profile Installation: - Affix tape all the way around on the right side snug against the bead hook - Then repeat a second circumference around the left side, providing double-thick coverage over the spoke holes - Use a red-hot awl or similar to pierce the valve hole
Spank Oozy/Spike Rear Hub 135mm/142mm Axle Shafts
$26.00
Replacement axle for all Oozy hubs and 2016 Spike hubs.
Spank Oozy Boost Rear Hub 148mm Alloy Axle Shaft
$29.00
Replacement Alloy Axle Shaft for OOZY Trail Boost R148 Rear Hubs. Not compatible with non-Boost Hub versions. Material: Alloy Weight (g): ±28 Compatibility: OOZY Boost 148 Rear Hubs
Spank Spike DH Rear Hub 150/157mm Steel Axle Shaft
$29.00
Replacement Steel Axle Shaft for SPIKE DH R150 Rear Hubs. Compatible with 12x150mm hubs and those already converted to 12x157mm. - Material : Steel - Weight (g): ±81 - Compatibility: SPIKE DH 12x150mm / 12x157mm (converted) Rear Hubs
Spank Spoon Hub Single Speed Conversion Kit
$30.50
SPANK SPOON Hub Single Speed Conversion Kit. - Cassette spacers - 13T driver cog - Cassette lock ring
Spank Spoon 20 Front Hub 15x100mm Adaptor
$32.00
15x100mm adapter for SPOON 20 Front hubs. Compatible with SPIKE and SPOON wheels produced from 2011-2015 (built with SPOON hubs). Not compatible with 2016 SPIKE or SPOON wheels (built with SPIKE hubs). Not compatible with Spike Race28 Enduro Wheels. Material: Alloy Weight (g): ±22 Compatibility: SPOON front hubs
Spank Spoon 20 Front Hub 20x110mm Adaptor
$32.00
20x110 adapter for SPOON 20 Front hubs. Compatible with SPIKE and SPOON wheels produced from 2011-2015 (built with SPOON hubs). Not compatible with 2016 SPIKE or SPOON wheels (built with SPIKE hubs). Not compatible with Spike Race28 Enduro Wheels. Material: Alloy Weight (g): ±20 Compatibility: SPOON front hubs
Spank Spoon 20 Front Hub QR Adaptor
$32.00
QR adapter for SPOON 20 Front hubs. Compatible with SPIKE and SPOON wheels produced from 2011-2015 (built with SPOON hubs). Not compatible with 2016 SPIKE or SPOON wheels (built with SPIKE hubs). Not compatible with Spike Race28 Enduro Wheels. Material: Alloy Weight (g): ±26 Compatibility: SPOON front hubs
Spank Oozy/Spike Front Hub Adaptors
$37.50
Hub Adapters for all Oozy hubs and 2016 Spike hubs.
Spank Oozy/Spike Front Hub Boost 15x110 Adapter
$37.50
Adapters for Spike/Oozy Boost front hubs. - Material: alloy - Weight (g): 35 - Compatibility: OOZY/SPIKE Boost Front Hubs
Spank Oozy/Spike Rear Hub Adaptors
$37.50
Hub Adapters for all Oozy hubs and 2016 Spike hubs.
Spank Spike DH Rear Hub Adaptor
$37.50
Converts SPIKE DH R150 Rear Hubs to 12x157mm. Compatible only with SPIKE and SPOON (150mm) wheels produced in 2015 or later (with SPIKE hubs). - Material : Alloy - Weight (g): ±14 - Compatibility : SPIKE DH 12x150mm Rear Hubs
Spank 12 to 10mm Step-down Bolt-on Axle
$46.50
12mm to 10mm bolt-on axle. - Material: Alloy Axle and Caps, Steel Bolts - Weight (g): 62 - Compatibility: SPANK 12x135/142 Rear Hubs
Spank Spike DH Rear Hub Bearing Kit
$60.50
More robust bearings for Spike DH hubs.