Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Wheels

DT Swiss XMC 1200 SPLINE 30 27.5-inch Front
$1,760.50
The XMC 1200 SPLINE 30 is the ultimate all-mountain wheel. A carbon layup specifically tuned for all-mountain use makes the rim tough, yet super-light. And, with a 30mm internal width, it's made for wide rubber. The hubs feature the latest incarnation of our Ratchet System for smooth, rapid engagement and reliability. Extremely refined machining and fully lasered graphics make them the lightest hubs DT Swiss has ever made. Together with bladed, top-end spokes and perfect DT Swiss build quality, this wheelset is made to ride trails with speed and confidence.
DT Swiss E 1900 SPLINE 30 27.5-inch Rear
$434.50 - $455.50
Nowadays, bikers ride what used to be called downhill trails on enduro bikes. The trails are getting rougher, and the demands on the gear and rider are greater. The E 1900 SPLINE has been developed to deal with precisely these requirements. With its stiff aluminum rim, lightweight straight-pull spokes, and proven DT Swiss hubs, this wheel is well-prepared for any challenge. The balance of weight and stiffness will put a smile on your face whether you're riding uphill or downhill. After all, most of the best trails don't offer lift service.
Zipp 30 Course Disc Brake Rear Wheel (Tubular)
$742.00 - $850.00
Upgrade your road bike with Zipp’s 30 Course Disc wheels. Featuring stiff, light 26mm-deep Zipp aluminum rims, Zipp's precision 77D/177D disc hubs and Sapim's outstanding CX-Ray spokes, these hoops maximize your power transfer for superior acceleration, climbing and handling. They also boast a 25mm-wide tire bed for running wider tires to improve the ride even more.
Zipp Rotor Protector
$27.50 - $32.00
Help ensure your rotors are not damaged, contaminated in transit, or in storage with this simple solution. This also helps protect anything that may come into contact with the rotor during transport. - Protects rotors during transit - Neoprene cover to protect against water and grease - Reinforced gusset and drawstring to protect the edges of the rotor and to cinch down tightly during transit
Zipp 404 NSW Carbon Clincher Wheel
$2,425.00
Following the success of the 808 NSW, which was ridden to victory at the Pro Men’s Ironman World Championships and the Elite Women’s UCI Team Time Trial World Championships, Zipp is proud to launch their second wheelset in the NSW Series, the Zipp 404 NSW Carbon Clincher. Zipp's advanced development engineers in their top-secret lab, known as The Nest, have delivered a wheelset with improved braking performance, exceptional aerodynamic efficiency, and unparalleled crosswind stability with the most popular and best-selling rim depth. Like the 808 NSW, the 404 NSW also makes use of a Cognition hubset for increased durability and exceptionally low freehub drag. No matter where you ride, the 404 NSW is engineered to make that ride faster. With a rim depth of 58mm, the 404 NSW is designed as a do-everything wheelset that is adept at climbing and maintaining speed on the flats; a wheel strong enough to handle the Spring Classics, but light enough to inspire sprints out of corners. With its advanced aerodynamics, developed using 42 different CFD (Computational Fluid Dynamics) concept studies and months in the wind tunnel, the 404 NSW’s unrivaled crosswind stability saves watts that would have been spent keeping the bike straight, and provides unequivocal confidence for high speed descending. When it comes time to slow for a corner, the NSW-exclusive Showstopper brake track stands ready to deliver the best modulation and shortest stopping distances available, regardless of weather conditions or the length of the descent. Simply put, the 404 NSW represents the cutting-edge of carbon clincher wheel technology delivered straight from The Nest, where Zipp’s advanced development engineers design the world’s fastest wheels.
Zipp Decal Set
$27.20 - $39.00
These die-cut borderless decals provide a distinctive look to go with the distinctive sound and aero-advantage of Zipp wheels rolling at 45km an hour. Zipp’s Matte white and Matte black decals also are still available. Each decal kit has seven decals sufficient to cover one wheel and two matching valve-hole decals. Note: Before applying the decals, make sure the rim surface is free of dirt and debris. We recommend a gentle wipe with acetone or rubbing alcohol. Peel the white backing sheet from the decal, orientate, position and gently press the decal onto the rim surface. Starting at one end, remove the surface clear cover slip and then work the decal into the dimples using a 3M squeegee.
Zipp Sapim CX-Ray Straight Pull Spokes and Nipples
$15.00 - $29.00
- Replacement straight pull spokes for Zipp 88 (Front) and 188 (Rear) Hubs
The Wheel Shop Fratelli FX 25 XXX/Novatec D881SB 27.5-inch Front
$299.99
- Position Front - Wheel Diameter/ISO 27.5'' / 584 - Axle Type 20mm TA - Hub Spacing 110mm - Wheel-Brake Comp. Disc IS 6-bolt - Freehub Body - - Wheel Tire Type Tubeless Ready - Rim Material Aluminum - Rim Construction Double wall - Rim Internal Width 25mm - Rim inner width range 22-27.9mm - Rim Color Black - Rim Drilling 32 - Hub Model Novatec D881SB - Wheel Weight - - Spoke Type DT Champion - Valve Presta - Rim External Width 30.8mm - Depth 22mm - Rim Model Fratelli FX 25 XXX - Skewers Included No
Sun Ringle Inferno 25 Rim
$85.99
PRODUCT SPECS: - Size: 26?, 27.5" (sleeved only) , 29? - Outside Width: 25mm - Inner bead width: 20.3mm - Section Height: 19mm - Weight: 26?- 448g, 27.5"-495g, 29?- 527g - Type: Sleeved or Welded - Brake Compatibility: Disc Only - Hole Count: 28, 32
Stan's NoTubes Bravo Pro 29 Rear Wheels (Shimano)
$1,499.99
Built for all-day trail rides and enduro racing, and developed with the World Championship-winning Atherton DH Team, our new Bravo wheelset rethinks carbon fiber from the ground up. The Bravo's Radial Impact Absorbing Carbon Technology (RiACT) is three times stiffer than our aluminum rims laterally, but absorbs radial impacts to withstand bigger hits and roll faster. Patented Bead Socket tubeless technology improves traction, and creates a lighter, stronger rim. Weighing less than 1720g (29er), the Bravo's 32mm WideRight profile increases tire volume without negatively affecting tread shape or sidewall height. With the added durability and quick engagement of our new Neo and Neo Ultimate hubs, the Bravo is the new benchmark for all trail wheelsets. Bravo wheels include: pre-installed tape for tubeless use and presta valve; 15x100mm front wheels include quick-release end caps and quick release; 12x142mm rear wheels also include quick-release end caps and quick release; small parts bag, replacement spokes, and spoke tension readout for your unique wheelset. - Designed for Trail, All-Mountain and Enduro Racing - Faster engaging, 100% CNC machined Neo Ultimate hubs - Sapim Custom Force 2.0/1.7/1.8 spokes with Secure Lock aluminum nipples - RiACT system absorbs impacts and rolls faster - Bead Socket Technology for unmatched tubeless performance - WideRight rim design optimized for wider Trail and All-Mountain tires - 2-year warranty with 3-year crash replacement
Stan's NoTubes Bravo Team 29 Rear Wheels
$1,229.99
Built for all-day trail rides and enduro racing, and developed with the World Championship-winning Atherton DH Team, our new Bravo wheelset rethinks carbon fiber from the ground up. The Bravo's Radial Impact Absorbing Carbon Technology (RiACT) is three times stiffer than our aluminum rims laterally, but absorbs radial impacts to withstand bigger hits and roll faster. Patented Bead Socket tubeless technology improves traction, and creates a lighter, stronger rim. The Bravo's 32mm WideRight profile increases tire volume without negatively affecting tread shape or sidewall height. With the added durability and quick engagement of our new Neo and Neo Ultimate hubs, the Bravo is the new benchmark for all trail wheelsets. Bravo wheels include: pre-installed tape for tubeless use and presta valve; 12x142mm rear wheels also include quick-release end caps and quick release; small parts bag, replacement spokes, and spoke tension readout for your unique wheelset. - Designed for Trail, All-Mountain and Enduro Racing - Faster engaging, 100% CNC machined Neo Ultimate hubs - Sapim Custom Force 2.0/1.7/1.8 spokes with Secure Lock aluminum nipples - RiACT system absorbs impacts and rolls faster - Bead Socket Technology for unmatched tubeless performance - WideRight rim design optimized for wider Trail and All-Mountain tires - 2-year warranty with 3-year crash replacement
The Wheel Shop Fratelli FX 35 Plus/SRAM 900 27.5-inch Front
$389.99
- Position Front - Wheel Diameter/ISO 27.5'' / 584 - Axle Type 15mm TA - Hub Spacing 110mm Boost - Wheel-Brake Comp. Disc IS 6-bolt - Freehub Body - - Wheel Tire Type Tubeless Ready - Rim Material Aluminum - Rim Construction Double wall - Rim Internal Width 35mm - Rim inner width range 35-44.9mm - Rim Color Black - Rim Drilling 32 - Hub Model SRAM 900 - Wheel Weight - - Spoke Type DT Champion - Valve Presta - Rim External Width 40mm - Depth 21.6mm - Rim Model Fratelli FX 35 Plus - Skewers Included No
The Wheel Shop Mavic EN427 Disc/Novatec D791SB 27.5-inch Front
$209.99
- Position Front - Wheel Diameter/ISO 27.5'' / 584 - Axle Type 15mm TA - Hub Spacing 100mm - Wheel-Brake Comp. Disc IS 6-bolt - Freehub Body - - Wheel Tire Type Tubeless Ready - Rim Material Aluminum - Rim Construction Double wall - Rim Internal Width 27mm - Rim inner width range 22-27.9mm - Rim Color Black - Rim Drilling 32 - Hub Model Novatec D791SB - Wheel Weight - - Spoke Type DT Champion - Valve Presta - Rim External Width 30mm - Depth 22mm - Rim Model Mavic EN427 Disc - Skewers Included No
Schmidt SON 28 Dynamo Hub 6 hole
$430.00
SON 28 is a generally approved hub dynamo for wheel sizes from 16“ to 29“. The new spherically shaped model succeeds SON 28 with a cylindrical housing which has been built from 2000 to 2011. The wider distance between flanges and bearings made the non-disc version even more robust and durable, moreover the weight was reduced by 140 g to 440 g! Disc-versions are available with 6 bolt mount or center lock mount (460 g / 430 g). At 16 km/ h (in 700c-wheel) the SON 28 generator achieves the conventional nominal output of 6 volt s / 3 watts and yields power with more than 65 % efficiency for head and rear light or charging sets. With lights switched off a SON runs almost as smoothly as any good front-wheel hub without generator.
Schmidt SON 28 Dynamo Hub Center Lock
$430.00
SON 28 is a generally approved hub dynamo for wheel sizes from 16“ to 29“. The new spherically shaped model succeeds SON 28 with a cylindrical housing which has been built from 2000 to 2011. The wider distance between flanges and bearings made the non-disc version even more robust and durable, moreover the weight was reduced by 140 g to 440 g! Disc-versions are available with 6 bolt mount or center lock mount (460 g / 430 g). At 16 km/ h (in 700c-wheel) the SON 28 generator achieves the conventional nominal output of 6 volt s / 3 watts and yields power with more than 65 % efficiency for head and rear light or charging sets. With lights switched off a SON runs almost as smoothly as any good front-wheel hub without generator.
Stan's NoTubes Rim Tape
$23.99 - $33.99
Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims. 21mm width fits: - ZTR Olympic - ZTR Iron Cross - ZTR 355 - ZTR Alpine - ZTR Crest - ZTR Alpha 340 (2 layers) - ZTR Alpha 400 (2 layers) - Most road clincher rims 25mm width fits: - ZTR 355 (26", 650b, 29") - ZTR Crest - Crest MK3 - ZTR Arch EX - ZTR Flow EX - Crest S1 27mm width fits: - ZTR Flow EX - ZTR Bravo - ZTR Hugo 52mm - Arch S1 - ZTR Rapid 28 - ZTR Rapid 30 - Arch MK3 30mm width fits: - ZTR Flow MK3
Schmidt SON 28 15MM THRU AXLE 150MM
$630.00
Manyfat bikes use a 150mm wide thru axle, so Schmidt now makes a suitable hub. Flange spacing is symmetrical, 83mm wide. ISO disc only. The Schmidt Dynamo front hub or SON (Schmidt's Original Nabendynamo) is extremely reliable and has almost no drag. Made by Wilfried Schmidt Maschinenbau in Tübingen, Germany, the hub is quiet and is designed to give at least 50,000 kilometers of trouble free riding between servicings. The hub powers many different six volt headlights including Schmidt's own E6 halogen models, the Schmidt Edelux and Edelux II LED headlight, both halogen and LED headlamps (as well as taillights) made by Busch & Müller in Meinerzhagen, Germany, Supernova lights from Germany, and Spanninga lights from France. The SON is extremely popular amongst long distance cyclists who need reliable lighting for all night cycling in any weather conditions. Brevet riders would rather have light when they need it, and don't want to carry batteries for a 1200k event. Bicycle commuters and people who don't require an automobile depend on the SON to make their cycling safe and efficient all year long in sun, rain and snow. Touring cyclists need light to make it to their next campground on a long day's trip. Many cyclists want to charge a cell phone or GPS while they ride. The SON hubs are ideal for this purpose. We have several AC to DC converters for this purpose. When your bicycle can make its own light, it becomes a reliable means of transportation, not just a toy or play thing for an afternoon's entertainment or exercise. With an automobile, you take its lights for granted. You get in the car, turn on a switch, and drive on down the road with the light you need. With the SON, you can take quality lighting on your bicycle for granted, just as you do in a car, making your bicycle just as convenient to use for everyday transportation as an automobile, but without the environmental degradation. Who knows, you may even decide that you no longer require an automobile.
SRAM X0 Rear Hub
$520.99
SRAM's X0 Hub offers lightweight, reliable performance. Ultra-durable, high-precision Speedball bearings spin smoothly in all conditions, and the tapered aluminum axle provides strength with minimal weight. This hub devours techy sections with it's super-smooth 6.9-degree engagement Double Time ratchet system. It accommodates standard 6-bolt rotors and comes with 12mm through-axle end caps and a 9mm quick release, so you can customize it to fit your ride.
The Wheel Shop Mavic Open Pro/Shimano 105 FH-5800 700c Rear
$340.00
- Position Rear - Wheel Diameter/ISO 700C / 622 - Axle Type QR - Hub Spacing 130mm - Wheel-Brake Comp. Rim - Freehub Body Shimano HG 11 - Wheel Tire Type Clincher - Rim Material Aluminum - Rim Construction Double wall - Rim Internal Width 15mm - Rim inner width range 0-21.9mm - Rim Color Black - Rim Drilling 32 - Hub Model Shimano 105 FH-5800 - Wheel Weight - - Spoke Type DT Stainless - Valve Presta - Rim External Width 19.6mm - Depth 16mm - Rim Model Mavic Open Pro C - Skewers Included Yes
The Wheel Shop Sun Inferno 27/Shimano Deore HB-M6010 27.5-inch Front
$199.99
- Position Front - Wheel Diameter/ISO 27.5'' / 584 - Axle Type 15mm TA - Hub Spacing 100mm - Wheel-Brake Comp. Disc Center Lock - Freehub Body - - Wheel Tire Type Clincher - Rim Material Aluminum - Rim Construction Double wall - Rim Internal Width 22mm - Rim inner width range 22-27.9mm - Rim Color Black - Rim Drilling 32 - Hub Model Shimano Deore HB-M6010 - Wheel Weight - - Spoke Type DT Stainless - Valve Presta - Rim External Width 27mm - Depth 19mm - Rim Model Sun Inferno 27 - Skewers Included No
SRAM 746 Rear Disc Hub
$174.99 - $191.00
High quality sealed bearing hub is available in traditional and modern configurations. - Steel axle, aluminum end caps with steel knurled contact surfaces - Same proven driver mechanism as higher priced models - Spoke Interface: J-Bend - Hub/Brake Compatibility: 6-Bolt Disc - Skewer Included: No - Bearing Type: Sealed Cartridge
SRAM 300 Rear Hub
SRAM's 300 Hub is solid, dependable, and an excellent value. An aluminum hubshell with machined flange offers no-nonsense durability. Dependable cup and cone bearings roll smooth for the long haul and a strong, steel quick release axle holds up under pressure, just like you.
SRAM 300 Front Hub
SRAM's 300 Hub is solid, dependable, and an excellent value. An aluminum hubshell with machined flange offers no-nonsense durability. Dependable cup and cone bearings roll smooth for the long haul and a strong, steel quick-release axle holds up under pressure, just like you.
Shimano Alfine S700 Cassette Joint Unit
$32.99
Shimano Nexus and Alfine Internally Geared Hub Cassette Joints - Shimano model # CJ-S700 - Does not include cable fixing bolt unit - OEM cassette joint unit for Alfine SG-S700
Evo Quincy QR Skewer
$15.99
- Extra long quick release for rear axle mount rack systems
49°N MTB/Urban 27.5 Rim Brake Front
$99.99
A tough, no-nonsense workhorse 27.5-inch rim brake wheelset with MTB hub spacing that's perfectly suited to a wide range of applications from MTB to urban/commute/trekking. - Pinned construction double-wall rim with generous 20mm internal width suitable for a wide range of tire widths - Stainless Steel eyelets & CNC machined sidewall w/wear indicator - Joytech alloy QR hub w/serviceable cup and cone bearings - Reinforced head straight gauge 14G/2.0mm SUS304 Stainless Steel spokes (black) w/12mm brass nipples (silver) - Weight: 974g
Stan's NoTubes 3.30/3.30Ti Hub Kit
$34.50
Stan's 3.30/3.30Ti Hub Kit converts Stan's 3.30 front hubs from quick-release to through-axle compatible. Installation is easy—just pull the old ones off and put the new ones on. Conversion kits available in 12mm and 15mm.
SRAM Rise 60 Rear Wheel (26-inch)
$1,440.50
From cranking up steep trails to adrenaline-pumping descents, SRAM's Rise 60 wheels are the perfect balance of low weight, quick engagement and speed-boosting stiffness. From XC trails to endurance rides to all-mountain shredding, the light, strong carbon rims, Sapim CX-Ray spokes and aluminum hubs work together for corner-ripping confidence, effortless climbing and slingshot acceleration. Plus, they're tubeless compatible for increased traction, flat-resistance and lower weight. All things every bike can benefit from. Every wheel connects you to the ground, only a few let you Rise to new heights.
WTB TCS AL 46mm Presta Valve
$39.99
WTB's TCS AL valves are aluminum to shed grams, and come in catchy anodized red, black, or blue. A stepped lock nut adds compatibility among various rim drillings, a smooth pump interface makes adding air easy, and a removable core makes setting beads and injecting sealant a cinch. - Presta - 46mm
Stan's NoTubes XD Freehub Conversion Kit (Stan's 3.30 Hubs)
$164.50
This conversion kit allows you to use SRAM's 11-speed mountain cassette on your Stan's NoTubes wheels. Each kit includes an XD freehub, spacer, drive side end cap, and three sealed bearings.