- Clamps to a threadless steerer, offers up to 3-1/4" stem height increase - Forged 6061 aluminum - Threaded alloy top cap
Turn your geared bike into a singlespeed machine with Surly's Singleator. The Singleator mounts to your derailleur hanger and provides a smooth, quiet and adjustable means of tensioning the excess chain slack on any bike. It's made from strong forged steel and features a triple-sealed spring, large-cog capacity, chain guides, fully-adjustable chain line, floating pulley, and a stainless-steel pivot bushing. And, it works with both BMX and standard chains.
Shimano's In-Line Brake Cable Adjuster with quick release allows you to make changes to your road caliper brake's cable tension or open a brake caliper's arms to remove a wheel.
The SRL lever gives riders with 1x drivetrains the option to control their Command Post with lever option that mounts beneath the bar in place of a front shifter. - Command Post lever for the modern 1x drivetrain systems. - Adjustable lever position allows for the perfect set up. - Sealed cartridge bearing pivot for smooth action. - Ideal pull ratio for easy lever activation. - Requires additional mounting hardware (SRAM MatchMaker or equivalent is recommended).
$23.99 - $30.99
Disc brake mount adaptor. - Includes stainless steel adaptor and caliper bolts
Our new Sonic bracket has been designed as the successor to the J2, which has been a somewhat ignored part of our range. With this update, it brings our new generation fit range to a wider range of price points, replacing the J2 bracket. The Ergo armrest has been created to offer both a huge upgrade in fit range as well as increased rider comfort with a supportive curve to cup the arms. Performance - The Sonic/Ergo is designed to present minimal frontal area to create as little aerodynamic drag as possible. The main purpose of an aerobar is, of course, to get the rider into a fast position. Despite a fairly minimalist appearance, the Sonic/Ergo offers a comprehensive fit range for exactly this purpose. Fit Data - Armrest Offset: -70mm to -2.5mm in 7.5mm steps - Armrest Width: 124mm to 290mm in 18.5mm steps (With Extensions at 100mm) - Armrest Stack: 60mm (no riser kit) to 130mm in 5mm increments (With aftermarket Riser Kit) - The extension length and rotation can be easily adjusted using the top bolt. There are 100 distinct position options achievable just by moving the armrests. Combine that with the risers and this bar offers 1500 possible configurations. As a clip-on bar it is also possible to adjust the extension width and tilt easily. This is the most adjustable clip-on bar on the market (and in history). It is worth noting that our previous top-level clip-on aerobar, the J4/F35, offered 90 possible configurations. This highlights the significant step forward we’ve made with our new generation aerobars in allowing riders to precisely adjust their position. Origin - After we released the Supersonic (J5) as a premium bracket with market-leading fit options and versatility we wanted to bring the same kind of options to the rest of our range of brackets and thus aerobars. By simplifying the extension clamp and shifting the wing forward to the bar center line we were able to meet our targets. As a consequence of the simplification the Sonic is the lightest of our current brackets. - The Ergo armrest shares the flippable design of the rest of our new generation armrests. By swapping sides or rotating the armrests smaller increments of movement are achieved – making it simple to fine-tune a riders position or match the position from their previous aerobar or bike. Extensions - Extension Shape: A 50a extensions offer a 50° ski bend shape. The 50a offer a 7.5mm lateral shift per side. This allows the rider to get their hands narrower or wider without tilting the extensions so much that the shifters touch. - Bracket: Sonic - Clamp Diameter: 31.8mm (26.0 w/Shims) - Armrest: Ergo / 10mm Pads - Armrest Width: 124mm to 290mm in 18.5mm steps (with Extensions at 100mm) - Armrest Offset: -70mm to -2.5mm in 7.5mm steps - Armrest Stack: The minimum is 60mm and the bracket is compatible with our existing risers which add up to 130mm stack with (70mm of spacers added) - Weight: 559g
Profile Design's J4 Bracket Kit lets you fine-tune your aero position down to the millimeter. For lightness, strength and aerodynamics, the brackets are made of forged and CNC-machined 6061 aluminum and have Marine-quality 12.9-grade bolts that are corrosion-resistant and hidden. For easy and fast adjustability, by simply loosening the fixing bolt on each side you can slide your extensions in and out. Meanwhile, the brackets hold the armrests set back 20mm from the center of the base bar or you can reverse the armrests for a forward position. You can also stack aftermarket risers on the brackets to raise the armrests (armrests, risers and extensions sold separately).
- Length: 8 mm, 5.5 mm - Material: Steel - Type: Hex - Set of 4 x 2
- Enables Double Barrel springs (1.43" ID x 2.10-2.19 OD) to be run on other brand shocks
- Lightweight, super-efficient chain guide with no moving parts - Proprietary polymer slider silently guides chain with minimal wear and drag - Integrated Beavertail bashguard - 160g
- Lightweight, super-efficient dual-ring chain guide for 2 x 10 drivetrains - Proprietary polymer slider silently guides chain with minimal wear and drag - Integrated bashguard protects chainrings - SRAM model specific to XX, XO, X9 and X7 2x10 cranks - 145-165g
Light, comfortable and stable, Profile Design's F-25 Armrest Kit provides excellent adjustability for finding your perfect position. These beautiful aluminum armrests have an ergonomic shape, fore/aft settings and 15 degrees of rotational adjustment to get them fitting just right. You also get supportive and comfortable pads and recessed, rust-resistant hardware (not shown).
$177.00 - $184.00
RockShox Reverb Remote Assembly for A1 generation Reverb and Reverb Stealth. - Includes remote Lever, MMX clamp, 1500mm of new hose, new hose barb, new strain relief - For "A1" designated posts, 2010-2012 - A1 posts have a silver return speed adjuster on the remote and no laser-etched logos on stanchion by the saddle cradle
Brake lever blades are easy to bend or break, but their sacrifice saves the more expensive parts of your brake system, which is a good thing! Shimano Hydraulic Disc Brake Lever Blades can be used on either the left or right lever, and these are for XTR 9020 brakes.
- S-bend triathlon bars - Lightweight 6061-T6 alloy - Easy to clean detachable pads - Cable holes make it compatible with bar end shift levers - Internal diameter: 19.6mm - 475 g - With 26.0 and 25.4mm shims
Shimano's Dura-Ace Di2 takes shifting to the next level. The Rear Wiring Kit connects to both the left and right shifters and Junction Box A (which displays battery power and allows manual adjusting). It also includes a battery mount, cable covers to route and hide the cables and a wire plug/unplug tool. The External Kit is meant to be run on the outside of the frame.
This is a rear derailleur mount link for Shimano's XTR M9100 rear derailleur. A straight link is essential to optimal shifting performance and reliability.
Compact armrest set comprises pads and cradles for Aura, Brezza II Team, Mistral, and Ventus.
Pair extension clamps and fixings for Vola Ltd and Vola Team.
Replacement saddle rail clamps for Crank Bros. seatpost. Two sizes let you choose a saddle with either 7x7mm or 7x9mm rails.
The K-EDGE Road Chain Catcher is THE Original Chain Catcher used by professional cyclists and pro teams around the world, in all types of racing including prestigious Olympic Games, World Championships, and Grand Tours, such as the Tour de France, Paris-Roubaix, and Giro d ’Italia. The K-EDGE chain catcher is a simple add-on component machined to precision which improves the overall function of your drive train and protects your valuable frame from dropped chains. - Material: 6061-T6 CNC machined Aluminum - Fitment: All braze-on mounted front derailleurs* - Hardware: Includes all mounting hardware for Shimano, SRAM, and Campagnolo front derailleurs * Not compatible with Campy EPS * May not work with all third party braze-on adapter clamps - Made in Boise, Idaho, USA, - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded.
Installation of air volume reducers for Cane Creek shocks make the spring rate more progressive. - Spacers can be cut to fine-tune spring curve
$26.00 - $27.50
The Problem Solvers Ultralight Top Cap is a featherweight top cap and bolt that's a perfect fit on 1 1/8-inch threadless forks.
M8 Bolt for DROPOUT-202 - Threads: M8x0.75 - Length Under Head: 1.050-inch - Head Diameter: 0.415-inch - Black anodized - Sold Individually - Made in the USA
$32.99 - $46.50
Zipp's Vuka Alumina Clip Risers are designed for use with the Vuka Alumina Clip’s above-bar option. The risers are designed to offer a wider range of adjustability within the Vuka Alumina aero-cockpit system. - Sold in pairs - Risers cannot be stacked - Includes hardware
Precision CNC machined of light and durable 7000-series aluminum with a fine anodized finish, and 100% made in the USA, Thomson's Seatpost Collar is a beautiful upgrade for your bicycle. It features their bolt, washer and barrel nut combination that allows float on both sides of the collar slot for consistent clamping force. Plus the bolt-hole angle, the collar's 12.7mm inside height and the offset slot, ensure optimum seatpost clamping force at only 25 inch pounds of torque to protect your precious frame and seatpost.
The Problem Solvers Travel Agent amplifies your braking power so that you can mix road, mountain and cyclocross brakes and brake levers. Instead of buying new levers or brakes, just install a Travel Agent and you're good to go. This trick gizmo is made of quality 6061 aluminum and is available with and without a built-in adjustment barrel. It works with cantilever brakes, road dropped handlebars, and Shimano STI and Campagnolo Ergopower levers.
Replacement swing plates for Alternator 1.0 dropouts.
Add a rack to your frame, even if you don’t have rack mounts. Allows standard rack stays to be bolted directly to the seat collar, for a clean and simple look. Made from lightweight aluminum for durability, with threaded inserts to bolt the stays directly into the seat clamp. - 35mm inner diameter fits all alloy Specialized MTB frame designs with 30.9mm posts and 35mm O.D. seat tubes. - 37mm inner diameter fits all carbon Specialized MTB frame designs with 30.9mm posts and 37mm O.D. seat tubes.
Keep your ride upright and looking fly with Specialized's Center mount kickstand! - Made of durable aluminum.
Page 1 of 19 Next page