$11.99 - $999.99
• Seatpost frame clamp with Quick Release • Size: 28.6, 31.8, 34.9mm • Color: Black
- BT-E6010 (battery) / SM-BME61 (battery mount) - Consistent performance, minimally affected by weather and temperature - Long life design, greater than 1,000 charge cycles - BT-E6010 features easy mounting and release
RockShox Reverb Service Kits - 12 of Each size Key, 3 Top Cap Assemblies, 10 Blue 1-Piece IFPs, 10 Foam Rings, 10 Inner Seal U-Cups, 10 Inner Seal Head Bushings, 10 Inner Seal Head O-Rings, 10 Strain Relief Barbs, 10 Remote Barbs, 10 Bleed Screws, 10 Air Valve Caps, 6 Seat Bolts and Nuts, 10 Main Piston O-Rings
The Vuka Clip On is all about providing the ultimate in fit, security, and adjustability for you to be faster and more efficient in your triathlon or time-trial aero position. Offered in high-performance carbon fiber, in both above and below-bar configurations. Additional risers, armrests and aero accessories available for fine tuning and maintenance. - Diameter: 31.8 - EVO 70/110: Weight: 480g, Length: 360mm - Race: Weight: 480g, Length: 330mm
- Includes 61903 bearings and one grease syringe - Measurable wattage savings between 1.5 and 9 watts per bearing set, depending on the level and condition of your existing bearings - Note: 88 front and 188v9 rear hubs are on all 2014 and newer Zipp 202, 303, 404, 808 - One kit required for: Zipp 188v9, 30 and 60 rear hubs
- Includes 61803 (1) and 61903 (1) bearings and one grease syringe - Measurable wattage savings between 1.5 and 9 watts per bearing set, depending on the level and condition of your existing bearings - Note: 88 front and 188v9 rear hubs are on all 2014 and newer Zipp 202, 303, 404, 808 - One kit required for: Zipp Super-9, 900 tubular and Sub-9 disc rear hubs
Wrist Comfort Bend provides easy hand clearance for a more-relaxed aero bar setup. They are especially suitable for a wide-aero setup. This extension shape is supplied as a standard with the super-adjustable Vola aero bar, which won ‘Best of Show’ at Eurobike 2013. - Pro version is alloy, with shot-peened, black anodized finish. - Team version is carbon The kit comprises clamps, new comfort cradles and silicone pads, wrist comfort bend extensions, and all fixing hardware. Stack height can be adjusted in the range 57–87 mm using the Riser Kit (separately available).
- Black carbon fiber weave headset spacers for tuning ride height, no logos - Kit includes 1-1/8" spacers: (15) 2.5mm, (25) 5mm, (16) 10mm, (2) 15mm, (4) 20mm
Shimano's Dura-Ace Di2 takes shifting to the next level. The Rear Wiring Kit connects to both the left and right shifters and Junction Box A (which displays battery power and allows manual adjusting). It also includes a battery mount, cable covers to route and hide the cables and a wire plug/unplug tool. The External Kit is meant to be run on the outside of the frame.
$197.99 - $265.50
The perfect bike fit needs to blend slippery aerodynamics and a comfortable, stress-free body position while optimizing control over the bike. Top fitters are constantly devising new methods to maximize and balance these goals. Designed using feedback from top fitters, Zipp’s Vuka Carbon Extensions give you all the options needed to optimize your position and go for the win or your personal best: Vuka Carbon Evo 70 and 110 extensions Vuka Evo extensions decrease drag by starting airflow over the body sooner while keeping the arms and wrists in a comfortable, relaxed position. The Evo shape, with a 20mm inward roll and multi-radius bend, is now available for the first time in carbon, allowing for even more complex shaping and lighter weight. Vuka Race Carbon Extension The Vuka Race Carbon Extension was designed using data compiled from thousands of fit sessions with recreational and professional cyclists and triathletes by the world’s best fitters. The Vuka Race bend places the wrists at a more natural bend to help riders remain in their tuck to optimize aerodynamics. - Compatible with Vuka Clip, Vuka Aero and all 22.2 systems - Internal cable routing
The Problem Solvers Eccentric Bottom Bracket E46 for PressFit 30 Frames fits frames with 46mm internal-diameter bottom-bracket shells and accepts cranksets with 24mm spindles. The eccentric allows 16mm of fore/aft adjustment for ample chain tensioning. This bottom bracket comes with spacers to fit Hollowtech II, MegaExo and X-Type cranksets. And an adapter kit for GXP cranksets is sold separately (CR0097).
105 piece assortment of 1-1/8-inch aluminum headset spacers. Kit includes: - 1.5mm (Silver) qty. 15 - 2.5mm (Silver) qty. 15 - 5mm (Silver) qty. 15 - 7.5mm (Silver) qty. 5 - 10mm (Silver) qty. 5 - 1.5mm (Black) qty. 15 - 2.5mm (Black) qty. 15 - 5mm (Black) qty. 15 - 7.5mm (Black) qty. 5
- Zinc plated for durability - All screws grade 12.9 - 475 Pieces Kit contains: - M5 X 10 Button Head qty. 20 - M5 X 12 Button Head qty. 20 - M5 X 16 Button Head qty. 20 - M5 X 12 Socket, Zinc qty. 35 - M5 X 16 Socket, Zinc qty. 35 - M5 x 20 Socket, Zinc qty. 15 - M5 X 25 Socket, Zinc qty. 10 - M5 X 30 Socket, Zinc qty. 10 - M5 X 12 Flat Socket Head, Spd qty. 25 - M5 X 16 Flat Socket Head, Spd qty. 25 - M5 X 8 Flat Socket, Zinc qty. 20 - M5 Nut qty. 50 - M5 Nylock Nut, Zinc qty. 40 - M5 Acorn Nut, Zinc qty. 10 - M5 Flat Washer qty. 65 - M5 Oversized Flat Washer qty. 25 - M5 Lockwasher qty. 25 - M5 Toothed, Zinc qty. 25
The Vuka Clip On is all about providing the ultimate in fit, security, and adjustability for you to be faster and more efficient in your triathlon or time-trial aero position. Offered in affordable aluminum in both above and below-bar configurations. Additional risers, armrests and aero accessories available for fine tuning and maintenance.
Shimano Di2 External Battery Mount - All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions - Use Di2 system checker to update component firmware
Zipp’s Vuka Extensions are made of ultralight, stiff carbon and come in different bends so that you can find the model that optimizes your aero position and maximizes your speed. The Straight extensions place you as low as possible, while the Race and Ski-Tip models have more bend for your wrists. Then, for a seamless junction between your shifters and the extensions, the Race Vuka Shift has built-in mounts that let you screw your shifters directly to the extensions. They accept Zipp’s R2C Aero shifters and SRAM's 900 TT and 500 TT shifters. All the extensions have internal cable routing and gradations to make adjustments easy.
Comprehensive shop kit for bottom bracket and cassette/freewheel spacing need. 139 pieces in a durable plastic storage box. Kit includes: - (20) 1.0mm FW Spacers - (10) 1.5mm FW Spacers - (10) 2.0mm FW Spacers - (10) NCS-4.5mm Cassette Spacers - (10) SHIM-.3MM Spacers - (10) SHIM-.5MM Spacers - (8) 0.5mm 24mm ID Spacers - (8) 1.0mm 24mm ID Spacers - (8) 2.5mm 24mm ID Spacers - (4) BB30-CLIPs - (4) BB30/PF30 Wave Washers - (4) GXP Wave Washers - (4) .7mm Bottom Bracket Spacers - (4) 1.8mm Bottom Bracket Spacers - (9) 2.5mm Bottom Bracket Spacers - (8) 0.5mm 30mm ID Spacers - (8) 1.0mm 30mm ID Spacers
Light, comfortable, and stable, Profile Design's F-35 Carbon Armrest Kit provides excellent adjustability for finding your perfect position. These versatile carbon fiber armrests have an ergonomic shape, 15 degrees of rotational adjustment, and 3 fore/aft positions with a total of 30mm of adjustment. You'll also love the comfortable Lycra-covered 16mm-thick EVA foam pads that simply attach to the armrests with adhesive-backed Velcro so no straps are required. The pads also have contoured edges for additional comfort and they're even antibacterial.
Comfort armrest set comprises pads and cradles and was original equipment on Ventus, use to upgrade Aura, Brezza II Team, and Mistral.
Compact armrest set comprises pads and cradles for Aura, Brezza II Team, Mistral, and Ventus.
Shimano Di2 External Battery Mounts - All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions - Use Di2 system checker to update component firmware
3T's S-Bend Aero Extensions are made of light, stiff carbon and feature ergonomic bends to keep your wrists comfortable during your time against the clock. - Standard 22.2-mm diameter - 305mm maximum extension from center line of bar clamp
Short Ski-bend bar extension pair in carbon-fiber with standard 22.2 mm diameter.
3T's Ski-Bend Aero Extensions are made of light, stiff carbon and feature large ergonomic bends to keep your wrists comfortable and ensure a sturdy grip during your time against the clock. - Standard 22.2-mm diameter - 305mm maximum extension from center line of bar clamp
3T's Wrist Comfort Bend Aero Extensions are made of light, stiff carbon and feature large ergonomic bends to keep your wrists as comfortable as possible and ensure a sturdy grip during your time against the clock. - Standard 22.2-mm diameter - 305mm maximum extension from center line of bar clamp
3T's Straight Aero Extensions are made of light, stiff carbon and feature no bends for an ultra low position during your time against the clock. - Standard 22.2-mm diameter - 305mm maximum extension from center line of bar clamp
RockShox Reverb Remote Assembly for A2 and B1 generation Reverb dropper seatposts. - Includes remote Lever, MMX clamp, Discrete Puck, 1500mm of new hose, new hose barb, and new hose strain relief - Works with A2 and B1 generation posts - A2 posts have a black return speed adjuster on the remote and no laser-etched logos on stanchion by the saddle cradle. - B1 posts have a black return speed adjuster on the remote and "ROCKSHOX" laser-etched logos on stanchion by the saddle cradle.
Profile Design's J4 Bracket Kit lets you fine-tune your aero position down to the millimeter. For lightness, strength and aerodynamics, the brackets are made of forged and CNC-machined 6061 aluminum and have Marine-quality 12.9-grade bolts that are corrosion-resistant and hidden. For easy and fast adjustability, by simply loosening the fixing bolt on each side you can slide your extensions in and out. Meanwhile, the brackets hold the armrests set back 20mm from the center of the base bar or you can reverse the armrests for a forward position. You can also stack aftermarket risers on the brackets to raise the armrests (armrests, risers and extensions sold separately).
The core of Profile Design's T-Carbon aerobar line, the J5 bracket was built for adjustability with features that enable a customized fit to dial in rider position. The Inline Compression Clamp (ICC) provides single bolt extension adjustment that is simple, secure and easy to use. - Standard on all new 2017 model T Plus Carbon Series Aerobars - Stackable with risers to elevate the armrest up to 70mm of extra height adjustment - The offset BTA bridge (not included) when combined with the new F-40TT armrest gives more expansive width and reach adjustments with a total of 32 armrest positions per side - Constructed of forged 6061-T6 Aluminum - Stack Height: 42mm - Width Adjustment: 37mm - Basebar Clamp Diameter: 31.8mm - Extension Clamp Diameter: 22.2mm - Weight: 266g
- Lightweight, super-efficient chain guide with no moving parts - Proprietary polymer slider silently guides chain with minimal wear and drag - Integrated Beavertail bashguard - 160g
Page 1 of 18 Next page