Searching...
New Westminster 604-524-3611NOW TWO LOCATIONSPort Moody 604-492-1891
RENTALS BIKE CLUB
My Acct
 
 
 
 
 
 
 

Refine By

Availability

Brands

+ more brands

Consumer Reviews

Size

+ more sizes
VisaMasterCardPayPal
 
> Brands

Brands

124 Results
Per Page 30 60
1 2 3 4 5 Next
Stan's NoTubes Presta Removeable Valve Core
$8.00

Stan's No Tubes' Presta Removable Valve Core is a replacement valve core for Stan's No Tubes Presta valve stems and Presta valve equipped rim strips. [more]

Stan's NoTubes Universal Kit Rim Tape
$10.00

Lay down Stan's Universal Kit Rim Tape before the tubeless conversion of your non-Stan's rims. It makes your rims air tight and ready for tubeless use by covering the spoke holes. [more]

Stan's NoTubes Neo Hub Spring and Pawl Kit
$18.00

Replacement springs and pawls. Includes 6 pawls, 6 springs and 1 plastic retaining ring that holds the pawls in place even during disassembly to ensure you're never searching the floor for tiny springs. [more]

Stan's NoTubes Core Remover
$19.50

Remove both Presta and Schrader valve cores with Stan's Core Remover. It's necessary to remove the valve core to inject sealant into the tire. [more]

Stan's NoTubes Pawl and Spring Kit
$21.00

The kit contains 3 pawls and 3 springs. Compatible with all Stan's Hubs. Very durable and with normal uses will last the life of the hub. [more]

Stan's NoTubes 2oz Tire Sealant Injector
$22.50

Stan's 2oz Tire Sealant Injector measures the desired amount of sealant then attaches to your valve stem for easy, no-mess application. And, it works on Presta and Schrader valves! [more]

Stan's NoTubes Rim Tape
$25.00 - $27.99

Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims. 21mm width fits: - ZTR Olympic - ZTR Iron Cross - ZTR 355 - ZTR Alpine - ZTR Crest - ZTR Alpha… [more]

Stan's NoTubes Tire Sealant
$25.00 - $39.99

The Product that Started a Tubeless Revolution Inside this simple bottle is a product that changed cycling. Today's tubeless systems rely on the lighter, more reliable, self-sealing performance of Stan's Tire Sealant. Just two ounces of Stan's in a converted standard tire or tubeless tire can… [more]

Stan's NoTubes Tubeless Valve Stems
$25.00

Use Stan's Tubeless Valve Stems when you're converting standard rims to tubeless via the taping method. These also have a removable core for easier application of tire sealant. Note: Schrader valve is for non-stepped Hugo rims. If your Hugo rim decal reads: - MAX RIM PRESSURE: 2.8 tires: 26psi, 3.0… [more]

Stan's NoTubes 3.30/3.30Ti Hub Kit
$29.00 - $34.50

Stan's 3.30/3.30Ti Hub Kit converts Stan's 3.30 front hubs from quick-release to through-axle compatible. Installation is easy—just pull the old ones off and put the new ones on. Conversion kits available in 12mm and 15mm. [more]

Stan's NoTubes 3.30/3.30Ti Rear Hub End Caps for XD Driver
$34.50

Replacement end caps for Stan's NoTubes rear hubs with XD Driver. [more]

Stan's NoTubes Neo Replacement Rear Axle
$34.50

Replacement rear axle for Neo and Neo Ultimate hubs. High-precision center-less ground treatment ensures perfect bearing fit. [more]

Stan's NoTubes Neo Front Hub End Caps
$36.00 - $37.50

Front end cap conversion kits for NoTubes Neo and Neo Ultimate - SealLock end caps feature a low friction U-cup seal that snaps into place [more]

Stan's NoTubes Neo OS Front Hub End Caps
$36.00 - $41.00

Front SealLock end caps for Neo OS and Neo Ultimate OS hubs. SealLock end caps feature a low-friction U-cup seal that snaps into place and stays secure even when your wheel is removed from your bike. Not compatible with non-OS hubs or Centerlock hubs. [more]

Stan's NoTubes Neo Rear Hub End Caps
$36.00 - $40.00

Rear end cap conversion kits for NoTubes Neo and Neo Ultimate hubs - SealLock end caps feature a low friction U-cup seal that snaps into place [more]

Stan's NoTubes 3.30HD 15mm Hub Kit
$37.00

Stan's 3.30HD 15mm Hub Kit makes Stan's 3.30HD front hubs 15mm through-axle compatible. Installation is easy—just pull the old ones off and put the new ones on. [more]

Stan's NoTubes 3.30HD 20mm Hub Kit
$37.00

Stan's 3.30HD 20mm Hub Kit makes Stan's 3.30HD front hubs 20mm through-axle compatible. Installation is easy—just pull the old ones off and put the new ones on. [more]

Stan's NoTubes 3.30HD QR Hub Kit
$37.00

Stan's 3.30HD QR Hub Kit makes Stan's 3.30HD front hubs quick-release compatible. Installation is easy—just pull the old ones off and put the new ones on. [more]

Stan's NoTubes Neo Front Hub Torque Caps
$37.50

Front RockShox/SRAM-specific Torque-Cap 15mm through-axle SealLock end caps for Neo and Neo Ultimate hubs. SealLock end caps feature a low-friction U-cup seal that snaps into place and stays secure even when your wheel is removed from your bike. Torque-Cap end caps have the same 15mm inside… [more]

Stan's NoTubes Threaded Valve Extenders
$37.99

Stan's Threaded Valve Extenders let you convert deep-section rims to tubeless. They're precision-machined from aluminum and are designed to fit deep-dish carbon and aluminum rims. And, they're threaded on the outside so you can install the Presta lock-ring nut for a perfect seal. [more]

Stan's NoTubes Alpha Rim Strip
$39.50

Stan's Alpha Rim Strip are specifically designed to fit Stan's Alpha 340 and Alpha 400 rims. Going tubeless allows you to run low tire pressure for better traction while drastically reducing the chances of a flat. Stan's rim strips create a tight seal with the tire bead, reducing the instances of… [more]

Stan's NoTubes Neo OS Front Hub Torque Caps
$39.50

Front RockShox/SRAM-specific Torque-Cap 15mm through-axle SealLock end caps for Neo OS and Neo Ultimate OS hubs. SealLock end caps feature a low-friction U-cup seal that snaps into place and stays secure even when your wheel is removed from your bike. Torque-Cap end caps have the same 15mm inside… [more]

Stan's NoTubes Olympic Rim Strip
$39.50

Stan's Olympic Rim Strip converts Stan's rims to tubeless so you can reap the benefits. Going tubeless allows you to run low tire pressure for better traction while drastically reducing the chances of a flat. Stan's rim strips create a tight seal with the tire bead, reducing the instances of… [more]

Stan's NoTubes 3.30/3.30Ti QR Hub Kit
$40.50

Stan's 3.30/3.30Ti 9mm Hub Kit makes Stan's 3.30 front hubs compatible with a standard quick-release. Installation is easy—just pull the old ones off and put the new ones on. [more]

Stan's NoTubes 3.30/3.30Ti Rear QR Caps (Type 2 Axle)
$40.50

Replacement end caps for Stan's NoTubes ZTR/3.30/3.30 Ti rear hub. They're compatible with a Type 2 hub. [more]

Stan's NoTubes Downhill Rim Strip
$41.00

Stan's Downhill Rim Strip converts standard tubed wheels to tubeless so you can reap the benefits. Going tubeless allows you to run low tire pressure for better traction while drastically reducing the chances of a flat. Stan's rim strips create a tight seal with the tire bead, reducing the… [more]

Stan's NoTubes Alloy Tubeless Valve Stems
$42.00

Stan's lightweight aluminum valve stems are half the weight of Stan's standard brass valves. The secure round base is compatible with most tubeless rims and a perfect fit for all Stan's BST rims. A removable valve core makes adding sealant easy, and these babies fit up to 8mm valve hole. Sold as a… [more]

Stan's NoTubes Cross Country 29er Rim Strip
$42.00

Stan's Cross Country 29er Rim Strip converts standard tubed wheels to tubeless so you can reap the benefits. Going tubeless allows you to run low tire pressure for better traction while drastically reducing the chances of a flat. Stan's rim strips create a tight seal with the tire bead, reducing… [more]

Stan's NoTubes Standard Rim Strip
$43.00

Stan's Standard Rim Strip converts standard tubed wheels to tubeless so you can reap the benefits. Going tubeless allows you to run low tire pressure for better traction while drastically reducing the chances of a flat. Stan's rim strips create a tight seal with the tire bead, reducing the… [more]

Stan's NoTubes 3.30/3.30Ti 12mm Rear Thru-Axle Conversion Kit
$60.50

Converts a Stan's 3.30/3.30Ti rear hub to a 12mm thru-axle. Compatible with both Type 1 and Type 2 rear hubs. [more]

124 Results
Per Page 30 60
1 2 3 4 5 Next