Filter By:

  • Show More Brands
  • Show Fewer Brands

Accessories/Parts

Schmidt Peter White Cycles 4.8mm Connector
$1.00
On the right is a female 4.8mm spade connector used to connect to the male connectors on the Schmidt SON hub axle. On the left is the same connector, but with a male stub that the nice folks at Schmidt soldered in place.
CatEye C-2 Clothing Clip
$5.49
Updated and more secure clothing clip for mounting CatEye safety lights.
Lezyne Micro/Hecto Drive Rear Mount
$5.99
Replacement silicone rubber mounting strap, for use with the Hecto, Micro, and Macro LED lights.
Lezyne Mounting Strap Femto And Zecto
$5.99
Replacement mounting strap for the Zecto and Femto LED lights.
Lezyne Strip Drive Replacment Strap
$5.99
Replacement mounting strap for the Strip Drive LED lights.
Specialized Stix Handlebar/Seatpost Light Mount
$6.99
Mount your Stix to either your handlebars or seatpost with this versatile Stix light mount with a flexible silicon strap. - Works with handlebars and seatposts from 22.2mm up to 35mm in diameter. - Second loop will fit most seatstay diameters. - Mount only, light sold separately
Specialized Stix Fabric Clip Mount
$7.00
Stick a Stix on it. This fabric clip mount makes it a cinch to clip your Specialized Stix to a bag, jacket, or jersey for on-the-go visibility. - Stainless steel spring clip for secure mounting.
Specialized Stix Helmet Strap Mount
$7.00
Easily mount the Specialized Stix to your helmet with this Stix Helmet Strap mount that attaches securely through your helmet's vents. - Allows Stix light to be mounted horizontally or vertically. - Includes hook-and-loop strap to securely mount to helmet through vents.
Specialized Stix Reflector Mount
$7.00
Mounts a Specialized Stix light to a CPSC, DIN standard reflector/rack bracket or the Specialized Pizza Rack. - Vertical CPSC hole pattern. - This mount can attach to the Horizontal Din hole pattern. - Specialized single hole pattern for the Pizza Rack. - Mounts Stix light horizontally. - Includes all mounting hardware.
CatEye Center Fork Bracket
$7.99
CatEye's Center Fork Bracket helps clear your handlebars by positioning your favorite CatEye headlight (sold separately) in front of your bike's head tube.
Lezyne Go-Pro LED Adapter
$8.00
Lezyne's Go-Pro LED Adapter allows you to mount your Lezyne LED light to any standard Go-Pro mount. This makes it fast and easy to switch swap out your camera and headlight using the same mount.
Lezyne LED Handle Bar Mount Adapter
$8.00
Lezyne's LED Handle Bar Mount Adapter is a composite matrix adapter to replace the rubber strap that ships on 2016 and later models of Macro XL, Power XL, Super XXL, and Deca XXL lights, so that they can be used with the Aluminum Handlebar Mount, the Composite Handlebar Mount, Aluminum Helmet Mount, or Composite Handlebar Mount.
CatEye Spacer X
$9.00
Optional mounting bracket for the CatEye Rapid X, CatEye Rapid X2, and CatEye Rapid X3. Allows you to mount your Rapid to any of the CatEye tail light brackets.
CatEye Rear Bracket
$10.50
Optional Accessory Rear rack Bracket for mounting most CatEye Taillights to rear racks with 50/80 mm spaced mounting holes.
Lezyne Micro/Macro Drive Front Mount
$10.50
A handlebar mount for Micro (front), Macro, and Hecto (front) LED lights. This mount is made of a snap-fit mold injected Composite Matrix cradle and is secured to a wide range of handlebar diameters with a multi-position, silicone rubber strap for tool-less installation.
Specialized Stix Arm/Leg Band Mount
$12.50
Increase your visibility by using the Stix Arm/Leg Band mount to attach your Specialized Stix light to arms and legs. - Includes rigid mount and fabric band for comfortable and secure hold. - Wraps around ankle to keep pant legs away from chainrings. - Increases visibility and versatility of Stix lights, both on an off the bike.
Lezyne CR 2032 Battery (8-pack)
$14.99
Replacement lithium ion CR2032 batteries for use in the Femto LED lights. SPEC: 700 mAh, 3.6V.
Lezyne Universal Helmet Mount
$15.00
The versatile Composite Matrix Helmet Mount is a durable and versatile accessory for Lezyne KTV Pro, Power XL, Macro XL, Hecto XL and Micro XL Drives. It is constructed with lightweight and durable mold-injected Composite Matrix material for its base plate and spherical pivot. A strong rubber and Velcro strap attaches the mount to the helmet. The Composite Matrix spherical pivot and cradle allow the user to adjust the position of the light in all directions.
Lezyne LED Handle Bar Mount
$16.00
Lezyne's Composite Bar Mount is a hard mount made of a reinforced Composite Matrix cradle for a strong and secure attachment of the Mega Drive, Deca Drive, and XL LED lights to the handlebar. It is designed for 25.4 mm or 31.8 mm bars, with the cradle designed to pivot 15 degrees laterally to allow adjustment of the LED light beam angle and directing it where it is most needed. A large thumb screw secures the CM mount to the bar without need of tools, and can be tightened by hand or a 1mm hex key. Molded rubber shims add grip and fine-tune fitting to undersized bars. Composite Bar Mounts are sold in a kit with the Mega Drive, Deca Drive, or XL LED lights.
CatEye Saddle Rail Mount (RM-1)
$16.99
Optional Accessory Saddle Rail Mount Bracket for most CatEye taillights.
Lezyne Composite Helmet Light Mount
$16.99
Lezyne's versatile Composite Matrix Helmet Mount is a durable and versatile accessory for Lezyne Macro, Micro and Hecto Drive lights. It is constructed with lightweight and durable mold-injected Composite Matrix material for its base plate and spherical pivot. A strong rubber and Velcro strap attaches the mount to the helmet. The Composite Matrix spherical pivot and cradle allow the user to adjust the position of the light in all directions.
Lezyne Composite Helmet Mount (XL)
$16.99
Lezyne's versatile Composite Matrix Helmet Mount is a durable and versatile accessory for Lezyne Mini XL, Power XL, Super XL, Deca and Mega Drives. It is constructed with lightweight and durable mold-injected Composite Matrix material for its base plate and spherical pivot. A strong rubber and Velcro strap attaches the mount to the helmet. The Composite Matrix spherical pivot and cradle allow the user to adjust the position of the light in all directions.
CatEye Helmet Mount
$21.50
This helmet mount works with all CatEye Lights. Pair it with the Volt 800 for the ultimate trail solution.
Topeak BarXtender
$24.99
Gain more room or find the perfect position for lights, computers, music players, GPS, or whatever, with the Topeak BarXtender. Attaches securely to the handlebars or stem and adjusts for optimum position. - Clamp: Fits 22-38 mm tubes (shims included) - Crossbar: Device mount bar 25.4 mm - Material: Engineering Grade Plastic and Steel - Mount: Handlebar, Handlebar Stem - Size (L x W x H): 18 x 3 x 3 cm, 7.1” x 1.2” x 1.2” (folded) - Size (L x W x H): 13 x 10 x 3 cm, 5.1” x 3.9” x 1.2” (open) - Weight: 116 g / 4.08 oz
Lezyne Aluminum Handle Bar Mount
$25.50
Lezyne's Aluminum Handle Bar Mount is a CNC-machined aluminum hard mount with a reinforced Composite Matrix cradle that securely holds the Mega Drive, Deca Drive, and XL LED lights. It is designed either for 25.4mm or 31.8mm bars, with the cradle designed to pivot 15 degrees of lateral adjustment to direct light where it is most needed. The hinged clamshell design provides a great grip that is ideal for large lights. A large thumb screw secures the AL mount to the bar without need of tools, and can be tightened by hand or a 1mm hex key. Molded rubber shims add grip and fine tune fitting to undersized bars. Aluminum Bar Mounts are sold separately and are not included with the Mega Drive, Deca Drive, or XL LED lights kit.
Blackburn Countdown 1600 Spare Mount
$26.50
Spare mount for Blackburn's Countdown 1600 front light
Sigma Sport IICON
$28.00
Now you can charge any USB-equipped device with Sigma's IICON USB connector. It's a universal USB charging adapter that allows riders to use Sigma's IION and IION XL rechargeable batteries to power or charge any USB device.
NiteRider Lumina Helmet Mount
$29.00
Increase your line of sight with the NiteRider Lumina Helmet Mount. By mounting your head light onto your helmet, it’ll allow you to see farther into your turn or wherever your head turns. System Compatibility: - Lumina Series - MiNewt Mini Series - Mako Series
Minoura SGS-400-OS Clamp
$29.99
Keep your handlebar organized and your devices secure with the SGS-400-OS (27.2/31.8/35.0mm) from Minoura. - Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.) - Lightweight and rustproof alloy construction - New LW-Clamp reduces weight 25 grams compared to previous models - Aluminum bar is position adjustable and uses Hex Bolt to install and remove - 27mm-35mm diameter
Problem Solvers Braze-on Light Mount
$29.99
Problem Solvers' Braze-on Light mount threads into your fork or fender eyelets, allowing you to mount lights or accessories. It's lower position is great for getting your light closer to the ground for better visibility.
Page 1 of 2 Next page